Rubber Additives
Rubberchem supplies rubber chemicals to tire and technical rubber manufacturers: accelerators, antidegradants, insoluble sulfur, peptizers and vulcanizing agents. Products ship direct from the factory, from producers in China, Germany and Indonesia.
Our accelerator range covers thiazoles, sulfenamides, thiurams, dithiocarbamates, guanidines and thioureas. The table below lists the main accelerator codes with their CAS numbers and typical uses.
Selection depends on the rubber type, the cure system and the service conditions of the part. Share your compound and target values, and we will suggest a product and send the TDS.
Request a quote, TDS or sampleMain rubber accelerators
| Code | Chemical name | CAS | Class | Typical use |
|---|---|---|---|---|
| MBT | 2-Mercaptobenzothiazole | 149-30-4 | Thiazole, primary | General-purpose NR and SBR compounds, technical rubber |
| MBTS | Dibenzothiazole disulfide | 120-78-5 | Thiazole, primary | Technical rubber; longer processing safety than MBT |
| CBS | N-Cyclohexyl-2-benzothiazolesulfenamide | 95-33-0 | Sulfenamide, primary | Tires and technical rubber; the most common sulfenamide |
| TBBS | N-tert-Butyl-2-benzothiazolesulfenamide | 95-31-8 | Sulfenamide, primary | Tire tread compounds; slightly longer delay than CBS |
| DCBS | N,N-Dicyclohexyl-2-benzothiazolesulfenamide | 4979-32-2 | Sulfenamide, primary | Steel cord compounds, thick parts |
| NOBS | 2-(Morpholinothio)benzothiazole | 102-77-2 | Sulfenamide, primary | Delayed cure; can form nitrosamines |
| TMTD | Tetramethylthiuram disulfide | 137-26-8 | Thiuram, secondary, sulfur donor | Fast cure, EV systems, sulfurless cure |
| TMTM | Tetramethylthiuram monosulfide | 97-74-5 | Thiuram, secondary | Longer processing safety than TMTD; no sulfur donation |
| TETD | Tetraethylthiuram disulfide | 97-77-8 | Thiuram, secondary, sulfur donor | Uses similar to TMTD |
| TBzTD | Tetrabenzylthiuram disulfide | 10591-85-2 | Thiuram, secondary, sulfur donor | In place of TMTD where nitrosamines are restricted |
| TiBTD | Tetraisobutylthiuram disulfide | 3064-73-1 | Thiuram, secondary, sulfur donor | Evaluated in place of TMTD |
| TBTD | Tetrabutylthiuram disulfide | 1634-02-2 | Thiuram, secondary, sulfur donor | Lower volatility, less blooming |
| DPTT | Dipentamethylenethiuram tetrasulfide | 971-15-3 | Thiuram, sulfur donor | Heat-resistant cure; EPDM and butyl |
| ZDMC | Zinc dimethyldithiocarbamate | 137-30-4 | Dithiocarbamate, secondary | Latex, low-temperature cure |
| ZDEC | Zinc diethyldithiocarbamate | 14324-55-1 | Dithiocarbamate, secondary | Latex goods, low-temperature cure |
| ZDBC | Zinc dibutyldithiocarbamate | 136-23-2 | Dithiocarbamate, secondary | Latex, EPDM, IIR |
| ZBEC | Zinc dibenzyldithiocarbamate | 14726-36-4 | Dithiocarbamate, secondary | Latex and EPDM compounds where nitrosamines are restricted |
| DPG | 1,3-Diphenylguanidine | 102-06-7 | Guanidine, secondary | Activates thiazoles and sulfenamides; silica treads |
| DOTG | 1,3-Di-o-tolylguanidine | 97-39-2 | Guanidine, secondary | Activator similar to DPG |
| ETU | Ethylene thiourea (2-imidazolidinethione) | 96-45-7 | Thiourea | CR and ECO cure |
| DETU | N,N'-Diethylthiourea | 105-55-5 | Thiourea | CR and EPDM, low-temperature cure |
CAS numbers are taken from our product pages. Class and use are general guidance. Exact technical values are in the product TDS.
![4-Methyl-N-[4-(phenylamino)phenyl]benzenesulfonamide (TPPD)](/_next/image?url=%2Furunler%2Fddts.jpg&w=3840&q=75)





























































Frequently asked questions
What is a rubber accelerator?
A rubber accelerator is a chemical that speeds up sulfur vulcanization. It lowers the cure time and temperature and improves the crosslink structure and final properties. Most sulfur-cured compounds use one primary accelerator and, where needed, a secondary accelerator.
What is the difference between primary and secondary accelerators?
Primary accelerators set the cure rate and processing safety. The main types are thiazoles (MBT, MBTS) and sulfenamides (CBS, TBBS, DCBS). Secondary accelerators are added in small amounts to activate the primary. Thiurams (TMTD, TBzTD), dithiocarbamates (ZDBC, ZDEC), guanidines (DPG) and thioureas (ETU) belong to this group. A secondary accelerator usually shortens scorch time.
What is the difference between sulfenamide and thiazole accelerators?
Both are benzothiazole-based primary accelerators. Sulfenamides have a delayed action: cure starts late and then runs fast. Thiazoles have a shorter delay and a moderate cure rate. Tire compounds mostly use sulfenamides, and technical rubber goods often use thiazoles.
ZDBC vs ZDEC: what is the difference?
ZDBC is zinc dibutyldithiocarbamate (CAS 136-23-2). ZDEC is zinc diethyldithiocarbamate (CAS 14324-55-1). Both are very fast dithiocarbamates for latex, EPDM and low-temperature cures. The difference is the alkyl group: butyl or ethyl. Besides acceleration, ZDBC also adds an antioxidant effect. Confirm the cure speed in your own compound with the TDS and a lab trial.
What is a nitrosamine-safe alternative to TMTD?
During cure, TMTD releases dimethylamine. This amine can form N-nitrosodimethylamine (NDMA), a regulated nitrosamine. TBzTD releases dibenzylamine, and its nitrosamine is not classified as carcinogenic. For this reason TBzTD is a common TMTD alternative. It has a higher molecular weight, so the dosage must be adjusted for the same effect. Among dithiocarbamates, ZBEC is the comparable option.
Which accelerators are used in tire compounds?
The core group in tire compounds is the sulfenamides: CBS and TBBS, and DCBS in steel cord compounds. DPG is common in silica-filled treads. A small amount of thiuram can be added as a secondary accelerator. Latex goods use dithiocarbamates, and CR compounds use ETU or its alternatives.
Who supplies rubber accelerators and rubber additives for production use?
Rubberchem supplies rubber accelerators and other rubber chemicals to tire and technical rubber manufacturers. Products ship in industrial quantities for production, direct from the factory. Send the product code, your monthly volume and your delivery country through the quote form.
How do I get a TDS or a sample?
Write the product code, the rubber type you use and your monthly volume in the quote form. We will send the product TDS and the sample options.